Enter Title

Duct Fan Coils

Vanjske jedinice

Duct fan coils YORK type YEFB (130-440), for installation in lowered ceilings, for two- and four-pipe systems. Because of their large dimensions they are suitable for cooling and heating larger areas. 
YEFB models have a large air flow (do 4.000 m3/h) and an external static pressure up to 250 Pa.
They are made of galvanized steel, with a three-speed engine and an air filter F4 (filter F5 is an option).
YEFB models for cooling can have a 2-row, 3-row and 4-row exchanger, whereas those for heating can only have 2-row and 3-row exchangers...


 

Casette Fan Coils

Vanjske jedinice

Casette fan coils York, type YHK (20 to 110), for installation in lowered ceilings, with a decorative board and a four-way exhaust, for a two- or four-pipe system.

Depending on its capacity, this model is available in two sizes, 600x600  and 800x800 mm. It gives the option of choosing between 6 fan speeds. A condensate drain pump is built into all the models.  The metal parts are insulated to avoid condensation...

 

Floor Ceiling Fan Coils

Laser

Floor ceiling fan coil YORK, type YLV/YLH, LASER series,  is characterised by a wide range of models appropriate for different spaces and purposes as well as heating and cooling in two- and four-pipe systems.

Laser fan coils can be installed on the floor and under the ceiling.

2-row, 3-row and 4-row exchangers are available for all models,  and an extra 1-row exchanger is installed onto four-pipe systems.
Housing of the fan coil is made of steel and coated with an epoxi-poliester veneering. Standard color is RAL9003 (white), but other colors are available upon request. 



Saphir

Floor ceiling fan coil YORK, type YSF/YSW, SAPHIR series, for vertical or horizontal installation,with or without decorative panels. Available in 4 different powers. Can be used in two- or four-pipe systems for heating and cooling. Modern design that fits into any space...


Low body

Fan coils YORK, type YLVR / YLIVR, LOW BODY series with air  exhaust on the upper side and air intake on the front side are appropriate for wall, floor or hidden installation, for two- and four-pipe systems.

The most important characteristic of these models are their compact dimensions which enable them to be installed in the smallest of spaces (height 430mm with mask and 395mm without mask)...

 

 

Thermostats

CSL - CSR

CSL - CSR is a group of the simplest Eurapo regulators without a room thermostat. CSL40 and CSR40 have a timer with which the fan's working time is programmed.
CSL are built-in models, and CSR are remote ones. They are both used for manually choosing the speed of the fan and turning the appliance on/off.

CML - CMR

CML - CMR are thermostats with which one can manually regulate temperature, fan speed, turning the appliance, on or off, summer/winter, valves, etc.
You can choose between two working modes, continuous fan operation and thermostatically controlled operation.
Continuous operation - when the fan coil achieves a certain temperature, the fan continues working.
Thermostatically controlled operation - fan shuts down when a certain temperature is achieved.

CER - CEL

CER - CEL are electronic regulators with a microprocessor. They give the following regulating possibilities: 

  • selection of fan working mode (continuous, OFF, thermostatically controlled)
  • manual or automatic selection of fan speed (depending on the model of the thermostat)
  • managing the summer/winter switch
  • regulating room temperature
  • window contact - when a window opens, the fan coil shuts down and vice versa
  • antifrost function
  • economy function
  • limiting temperature range
  • LED working indicator
  • LED air filter cleanliness indicator

Omnibus

Omnibus regulation is used for automatic control of all main functions of the fan coil by itself or as a part of a centralized system  connected via BUS. All data is stored on an electronic card, and any possible breakage is communicated through e-mail. One can manage the electronic card through an infrared remote control  (controlling every fan coil individually is an option)  or  analogously (regulating temperature, valves, summer/winter switch).
128 electronic cards can be controlled through one server, and Omnibus' maximum capacity is 8×128 cards.
Omnibus gives a lot of possibilities of personalization in accordance with the investor's specific requests. 

 

Wall Fan Coils

Vanjske jedinice

Wall fan coils York, type YHH (15-50), for wall installation, for two-pipe systems.

Capacity range:

TWO-PIPE SYSTEM
cooling 1,4 - 4,0 kW (7/12°C) at max. speed
                                                       heating 2,2 - 5,7 kW (50°C) at max. speed

 

 

Duct Fan Coils

Vanjske jedinice

Duct fan coils YORK type YEFB (130-440), for installation in lowered ceilings, for two- and four-pipe systems. Because of their large dimensions they are suitable for cooling and heating larger areas. 
YEFB models have a large air flow (do 4.000 m3/h) and an external static pressure up to 250 Pa.
They are made of galvanized steel, with a three-speed engine and an air filter F4 (filter F5 is an option).
YEFB models for cooling can have a 2-row, 3-row and 4-row exchanger, whereas those for heating can only have 2-row and 3-row exchangers...


 

Casette Fan Coils

Vanjske jedinice

Casette fan coils York, type YHK (20 to 110), for installation in lowered ceilings, with a decorative board and a four-way exhaust, for a two- or four-pipe system.

Depending on its capacity, this model is available in two sizes, 600x600  and 800x800 mm. It gives the option of choosing between 6 fan speeds. A condensate drain pump is built into all the models.  The metal parts are insulated to avoid condensation...

 

Floor Ceiling Fan Coils

Laser

Floor ceiling fan coil YORK, type YLV/YLH, LASER series,  is characterised by a wide range of models appropriate for different spaces and purposes as well as heating and cooling in two- and four-pipe systems.

Laser fan coils can be installed on the floor and under the ceiling.

2-row, 3-row and 4-row exchangers are available for all models,  and an extra 1-row exchanger is installed onto four-pipe systems.
Housing of the fan coil is made of steel and coated with an epoxi-poliester veneering. Standard color is RAL9003 (white), but other colors are available upon request. 



Saphir

Floor ceiling fan coil YORK, type YSF/YSW, SAPHIR series, for vertical or horizontal installation,with or without decorative panels. Available in 4 different powers. Can be used in two- or four-pipe systems for heating and cooling. Modern design that fits into any space...


Low body

Fan coils YORK, type YLVR / YLIVR, LOW BODY series with air  exhaust on the upper side and air intake on the front side are appropriate for wall, floor or hidden installation, for two- and four-pipe systems.

The most important characteristic of these models are their compact dimensions which enable them to be installed in the smallest of spaces (height 430mm with mask and 395mm without mask)...

 

 

Thermostats

CSL - CSR

CSL - CSR is a group of the simplest Eurapo regulators without a room thermostat. CSL40 and CSR40 have a timer with which the fan's working time is programmed.
CSL are built-in models, and CSR are remote ones. They are both used for manually choosing the speed of the fan and turning the appliance on/off.

CML - CMR

CML - CMR are thermostats with which one can manually regulate temperature, fan speed, turning the appliance, on or off, summer/winter, valves, etc.
You can choose between two working modes, continuous fan operation and thermostatically controlled operation.
Continuous operation - when the fan coil achieves a certain temperature, the fan continues working.
Thermostatically controlled operation - fan shuts down when a certain temperature is achieved.

CER - CEL

CER - CEL are electronic regulators with a microprocessor. They give the following regulating possibilities: 

  • selection of fan working mode (continuous, OFF, thermostatically controlled)
  • manual or automatic selection of fan speed (depending on the model of the thermostat)
  • managing the summer/winter switch
  • regulating room temperature
  • window contact - when a window opens, the fan coil shuts down and vice versa
  • antifrost function
  • economy function
  • limiting temperature range
  • LED working indicator
  • LED air filter cleanliness indicator

Omnibus

Omnibus regulation is used for automatic control of all main functions of the fan coil by itself or as a part of a centralized system  connected via BUS. All data is stored on an electronic card, and any possible breakage is communicated through e-mail. One can manage the electronic card through an infrared remote control  (controlling every fan coil individually is an option)  or  analogously (regulating temperature, valves, summer/winter switch).
128 electronic cards can be controlled through one server, and Omnibus' maximum capacity is 8×128 cards.
Omnibus gives a lot of possibilities of personalization in accordance with the investor's specific requests. 

 

Wall Fan Coils

Vanjske jedinice

Wall fan coils York, type YHH (15-50), for wall installation, for two-pipe systems.

Capacity range:

TWO-PIPE SYSTEM
cooling 1,4 - 4,0 kW (7/12°C) at max. speed
                                                       heating 2,2 - 5,7 kW (50°C) at max. speed

 

 

York
Ventilkonvektoren
Climaveneta
Eurapo
Ventilkonvektoren Midea
York

 


Ihr Warenkorb ist leer.

Öffne den Warenkorb