Climaveneta Fan Coils

Climaveneta duct fan coil type HWD for horizontal and vertical installation with the possibility of adjusting air-flow course, which makes it  very adaptable to every type of installation. 

cooling 16,8-29,8 kW (water temp. 7/12°C)
heating 34,6-60,4 kW (water temp. 45/40°C)

• Technical data

Climaveneta casette fan coil type XHDU for lowered ceiling installation, for two-pipe and four-pipe systems.

Casette fan coils Climaveneta are available in 4 modes:

XHDE 2T - with a single exchanger and remote control for a two-pipe system
XHDU 2T - with a single exchanger for a two-pipe system...

• Technical data

NFCC Model

 

Floor ceiling fan coil Climaveneta type NFCC  for  horizontal or vertical installation on the floor or under the ceiling, for two- or four-pipe systems. Eurovent certified.

Available in the following modes:
NFCC I - built-in, without thermostat, air intake from the lower side...

• NFCC leaflet
• NFCC technical data

 

NFT-NFC Model

Floor ceiling fan coils  Climaveneta, type NFT and NFC for horizontal or vertical installation on the floor or under the ceiling, for two- or four-pipe systems.
NFT have a built-in square fan with low noise levels and are therefore ideal for residential usage.
NFC have a centrifugal fan which contributes to larger capacity of the fan coil. These are suitable for installation in larger spaces.

• Technical data
  

Wall fan coil Climaveneta type MIC for installation on the wall, for two-pipe installations. It is ideal for residential usage because of its compact dimensions and sophisticated design. It has a Eurovent certificate. All functions are controlled through a remote control.

• Technical data

CB controller Plug In

Off/summer/winter switch. Three-speed air flow.  Temperature probe on the exchanger. Automatic ON/OFF channel control.

CP controller Plug In

Off/summer/winter switch. Three-speed air flow. Temperature probe on the exchanger. Automatic ON/OFF valve control...